Review from large USA carrier, buyer of 9 Durasweeper units.
Durasweeper for all types of commercial vehicles
Trucks, Trailers, Buses, Delivery Vans, Delivery Trucks, Tractor-trailers, Tankers, Flat Beds, Box Vans, Containers.
Durasweeper. Versatile system
Advantages of using Durasweeper
Durasweeper snow removal time is approximately 1 minute!
Save your cost and speed up your operations with Durasweeper!
Durasweeper Streamline Operations and Boost ROI
Speed up your operations with Durasweeper!
Environmentally friendly system!
Prevent accidents and avoid civil lawsuits!
Increase employees safety!
Reducing weight means
With help of Durasweeper you can remove snow from rooftop of vehicles without damaging the integrity surface of the roof. It will help you not just to save your workers time, but also to reduce fuel cost.
Durasweeper is the solution
Frequently asked questions
It has a 3600 mm wide by 800 mm diameter brush that is constructed of replaceable airport tarmac-grade polypropylene bristle cartridges that rotates at 204 Rpm and gently but effectively removes snow that has accumulated. Rotational brush can be raised or lowered electrically to clean surface areas situated at a height ranging between 416mm and 5628 mm off the ground, thus making the Durasweeper ideal for removing snow efﬁciently from any type of vehicle, regardless of the complexity of its surface area.
No! The distinguished feature of this equipment is, that Durasweeper has no ﬁxed, immovable parts, such as blades or plows, that can interfere with on roof panels, vents, or even loosen or raise rivets. This avoids damaging the vehicle. Thus, unlike other snow removal equipment that was developed previously, the Durasweeper unit can be applied effectively on all different types of vehicles, not only those that have a totally flat roof.
The Durasweeper unit must be ﬁtted on concrete pad, with a pad located directly underneath of Durasweeper’s steel frame. Anchor bolts then secure the unit to the concrete. Plans are given for both preexisting and nonexistent ﬁttings and installations.
The system requires a foot print of 50 square meters. Thoughtful consideration should be given to areas immediately around the unit for snow removal and general facility trafﬁc ﬂow.
The brushes for the Durasweeper units are produced by company “Tecsolum” and are constructed out of polypropylene. In fact, they are the same sort of polypropylene brushes used to sweep airport runways. Therefore, the durability of the brush itself should not be a problem. However, it’s worth mentioning, that brush is made up of 3 separate blocks. If an individual block ever wears out, it can be easily changed at a reasonable cost.
Each Durasweeper rooftop snow cleaning system unit comes with twelve (12) months manufacturers’ guarantee that covers all of its parts, but not the revolving brush. Except the rotary brush, there are very few components that might never need a replacement on the Durasweeer unit when it is used under normal conditions. The items that could potentially needed to be replaced after considerable time could include the electric hoses and ﬁttings, pulleys, and steel cables. Most routine work can be easily performed by a qualiﬁed mechanic using the service guide.
Because Durasweeper is affordable, faster and safer comparing with truck washing systems or manual labor. Vehicles can be operational and earn profit in no time.